Vali riik saadetise kohaletoimetamiseks

RockBoard RBO POW BLO ISO 10V2 Toiteallika adapter

Tootekood: 1338174

RockBoard RBO POW BLO ISO 10V2 Toiteallika adapter

Tootekood: 1338174

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably. 10…

RockBoard RBO POW BLO ISO 10V2 Toiteallika adapter

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably.

  • 10 galvanically isolated outputs (8 x 9V at 150 mA + 2 x 18V at 400 mA) for powering a full pedalboard from one unit
  • Advanced filter technology eliminates high-frequency noise; external transformer blocks low-frequency interference
  • Per-outlet short-circuit protection with status LEDs isolates faults without shutting down the rest of the rig
  • Includes 18V DC adapter with multi-regional plugs, 10 flat power cables, plus voltage and current doubler Y-cables
Täpsem kirjeldus sinu emakeeles ei ole veel saadaval. Abiks võib olla ingliskeelne kirjeldus.

Clean Isolated Power for a Full Pedalboard

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that replaces a tangle of single adapters with one compact unit. Ten transformer-isolated outputs feed up to ten pedals at once, so a complete board of drives, modulations, delays and digital units can run from a single mains feed. The ISO Power Block V10 is the right choice for guitarists, bassists and keyboard players who need quiet, reliable power for a medium-to-large pedalboard without ground-loop hum.

Standout Engineering

Each output sits behind its own isolation transformer, so noise from one pedal cannot bleed into another. Advanced filtering technology in every slot suppresses high-frequency interference, while the external 18V power adapter keeps low-frequency noise away from the audio path. Per-outlet short-circuit protection with a status LED means a single faulty cable will not bring the rest of the rig down.

Power Outputs and Voltage Configuration

  • 9V Outputs: 8 isolated slots, 150 mA each — handles standard analog pedals and most digital units
  • 18V Outputs: 2 isolated slots, 400 mA each — covers power-hungry digital and dual-voltage pedals
  • Total Current Capacity: 2,000 mA — enough headroom for a fully loaded board

Filtering and Protection

  • Galvanic Isolation: transformer-isolated per output — eliminates ground loops between pedals
  • HF Filtering: advanced filter technology in each slot — kills digital whine and RF interference
  • Short-Circuit Protection: per-outlet with status LED — a fault on one slot leaves the others running

Physical Specs and Package Contents

  • Dimensions: 123 x 70 x 26 mm — slim enough to mount beneath a RockBoard or any standard board
  • Weight: 180 g — light enough not to weigh down a touring rig
  • Connector: 2.1 x 5.5 mm barrel, center negative — the industry-standard stompbox plug
  • Included: 18V DC adapter with EU/UK/US/AU plug adapters, 10 x 60 cm flat power cables, voltage doubler Y-cable (blue), current doubler Y-cable (white)

Sobivus

Tüüp

Toiteplokk

Features

Väljundite arv

more than 8

Inputs and Outputs

Polaarsus

Center Minus

Pakend

Pakend sisaldab

Adapter, Toitekaabel, Y-Cable

Power supply

Laadija tüüp

Toiteplokk

Pinge

9V, 18V

Voolutugevus

2000 mA

Pistiku tüüp

Barrel

Toide

Adapter

Accessory

Toiteadapter kaasas

Jah

Dimensions and Weight

Laius (mm)

70

Sügavus (mm)

123

Kõrgus (mm)

26

Netokaal (kg)

0,18

Country

Päritoluriik

Hiina

Dokumendid

Kasutusjuhendid
Teave tootja kohta
Tootja:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Saksamaa
Vastutav isik:
Warwick GmbH & Co Music Equipment KG
Ohutusjuhised

Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.