Vali riik saadetise kohaletoimetamiseks

Uus

MusicNomad MN815 Sandpaper for Fret Leveler L-Beam Tööriist kitarridele

Tootekood: 1313186

Uus
MusicNomad MN815 Sandpaper for Fret Leveler L-Beam Tööriist kitarridele

Tootekood: 1313186

11,90 €
Tarnija laos saadaval
Tarneaeg täpsustatakse pärast tarnijalt tellimist
Vastavalt sinu tellimusele proovime kaubavarusid täiendada ja võtta sinuga ühendust tarnekuupäeva osas.
Tööriist kitarridele MusicNomad MN815 Sandpaper for Fret Leveler L-Beam Tööriist kitarridele

MusicNomad MN815 Sandpaper for Fret Leveler L-Beam Tööriist kitarridele

11,90 €
MusicNomad MN815 Sandpaper for Fret Leveler L-Beam is a P240-grit replacement roll designed to keep your fret leveling work moving without interruption. The 10 ft (3 m) x 7/8" (2.22 cm) adhesive-backed strip uses 3M Stikit Gold Abrasive — the same material professional repair shops rely on. Cut it to the length of any L-Beam and stick it on for...

MusicNomad MN815 Sandpaper for Fret Leveler L-Beam Tööriist kitarridele

MusicNomad MN815 Sandpaper for Fret Leveler L-Beam is a P240-grit replacement roll designed to keep your fret leveling work moving without interruption. The 10 ft (3 m) x 7/8" (2.22 cm) adhesive-backed strip uses 3M Stikit Gold Abrasive — the same material professional repair shops rely on. Cut it to the length of any L-Beam and stick it on for a flush, ready-to-sand surface.

  • P240 grit abrasive balances material removal with a workable surface for leveling frets.
  • 3M Stikit Gold Abrasive backing peels and sticks cleanly to the beam — no extra adhesive needed.
  • 10 ft (3 m) roll length lets you cut fresh strips for multiple beam sizes from one purchase.
  • The custom 7/8" (2.22 cm) width fits flush against all 7", 16.7", and 24" variants.
Täpsem kirjeldus sinu emakeeles ei ole veel saadaval. Abiks võib olla ingliskeelne kirjeldus.

MusicNomad MN815 Sandpaper Roll — Replacement Abrasive for Fret Leveler L-Beams

The MusicNomad MN815 is a P240-grit sandpaper refill built for the company's Fret Leveler L-Beam system. Each roll measures 10 ft (3 m) long by 7/8" (2.22 cm) wide and uses 3M Stikit Gold Abrasive — the same adhesive-backed material trusted by professional repair shops. This sandpaper refill serves as the right choice for guitar techs and DIY players who need a properly sized abrasive to keep their leveling beam in working order.

Why this refill works

P240 grit removes high spots efficiently while leaving a workable surface for crowning. Adhesive backing holds the strip flush against the beam, and one 10 ft (3 m) roll yields several refits.

Dokumendid

Ohutusjuhised

Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.