FiiO KA5 Hi-Fi kõrvaklappide eelvõimendi
The FiiO KA5 White is a flagship portable USB-C DAC and headphone amplifier that delivers desktop-grade decoding from a dongle-sized chassis. Built around dual CS43198 DACs and ultra-low-noise op amps, it supports PCM 768 kHz/32-bit and DSD256 native playback for studio-quality sound on the go. The aluminum-alloy body houses a 4.4 mm balanced output, a 3.5 mm single-ended/S/PDIF socket, and an OLED display with onboard menu control in a compact 56.3 × 22 × 12 mm chassis weighing about 19 g.
- Dual CS43198 DACs on a 6-layer immersion-gold PCB with ultra-low-noise op amps
- Up to 265 mW per channel from the 4.4 mm balanced output at 32 Ω
- Native PCM 768 kHz/32-bit and DSD256 decoding with five selectable digital filters
- 4.4 mm balanced and 3.5 mm single-ended outputs, with the 3.5 mm port doubling as S/PDIF digital output
Portable USB-C DAC and Headphone Amplifier With Desktop-Grade Decoding
The FiiO KA5 White is a flagship portable DAC and headphone amplifier that brings true high-resolution decoding to a dongle-sized form factor. Built around dual Cirrus Logic CS43198 DACs and ultra-low-noise op amps, it converts USB-C digital audio into a clean analog signal. With native PCM playback up to 768 kHz/32-bit and DSD256 plus 4.4 mm balanced and 3.5 mm single-ended outputs, this model is the right choice for audiophiles who want flagship decoding without carrying a desktop stack.
What Sets the KA5 Apart in the Dongle DAC Category
This model mounts its dual CS43198 DACs on a six-layer immersion-gold PCB, paired with high-performance ultra-low-noise op amps, while the OLED display shows the sampling rate and working state and the buttons handle menu selection, function settings, volume and track switching.
Dual CS43198 DACs With Native High-Resolution Decoding
The conversion stage is the heart of any DAC, and the KA5 packs two of Cirrus Logic's flagship CS43198 chips, rated at up to 128 dB SNR (4.4 mm output, 32 Ω, A-weighted).
- DAC Chipset: Dual Cirrus Logic CS43198 — two DAC chips on a 6-layer immersion-gold PCB
- Maximum Sample Rate: 768 kHz / 32-bit PCM, DSD256 native — covers studio-grade high-resolution formats without downsampling, plus five selectable digital filters
Balanced and Single-Ended Headphone Outputs With Real Driving Power
Its amplifier stage feeds both a 3.5 mm single-ended socket and a 4.4 mm balanced socket, with output impedance below 0.35 Ω on both ports to avoid coloring multi-driver IEMs.
- 3.5 mm Output Power: 122 mW + 122 mW @ 32 Ω, 13.5 mW @ 300 Ω — drives most portable headphones cleanly from the single-ended socket
- 4.4 mm Balanced Output Power: 265 mW + 265 mW @ 32 Ω, 54 mW @ 300 Ω — enough headroom for full-size dynamic cans and demanding IEMs
USB-C Input, S/PDIF Output, and a Pocket-Sized Aluminum Chassis
Connectivity runs through a USB-C input that supports both UAC 2.0 and UAC 1.0 modes, with a shared 3.5 mm S/PDIF output for legacy DAC chains. Bus-powered from the source device with no internal battery, the unit measures about 56.3 × 22 × 12 mm and weighs 19 g.
- Digital Input: USB Type-C — plug-and-play with Android, iOS (via the included Type-C to Lightning OTG cable), Windows, and macOS
- Headphone Outputs: 3.5 mm single-ended, 4.4 mm balanced — covers both common portable termination standards
- Frequency Response: 20 Hz – 50 kHz — flat within 0.1 dB across 20 Hz – 20 kHz
For Audiophiles Who Want Flagship Decoding Without a Desktop Stack
This model is the right choice for listeners who already own a library of high-resolution files and want to hear them properly through a portable rig. It suits owners of full-size dynamic headphones in the 16–300 Ω range who need the extra current of the 4.4 mm balanced output, as well as IEM users who want a low-output-impedance source. The 3.5 mm port also works as an S/PDIF digital output for feeding an external DAC or receiver.
White Aluminium Body With Electrophoresis Finish
The aluminium-alloy body of the white version is electrophoresis-coated, giving a rigid layer that resists scratches and corrosion and does not easily age or discolor. Firmware can be updated over USB, and on Android devices the KA5 can also be set up in the FiiO Control app, including high/low gain, five digital filters, L/R channel balance and screen flip.
Väljundite arv
THD
0,00037%
Toetatud vormingud
PCM, DSD
WiFi
Bluetooth
DA-muundamine
Mikrofon
MIDI-liides
Värv
Sagedusvahemik
Diskreetimissagedus
Signaali ja müra suhe
≥ 128dB
Ekraan
Jah
Sisendid
Väljundid
USB
S/PDIF
Jah
Mikrofonisisend
Analoogsisendid
Kõrvaklapiväljund
Jah (2 )
A-tüüpi pistik
Pakend sisaldab
USB-C to USB-A Adapter, USB-C-kaabel, Lightning Cable, Kasutusjuhend, Garantiikaart
Toiteadapter kaasas
Ei
Kõrgus (cm)
5,63
Laius (cm)
2,2
Sügavus (cm)
1,2
Kaal (g)
19
Päritoluriik
Hiina
Dokumendid
Kasutusjuhendid
Teave tootja kohta
Ohutusjuhised
Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.
Pikendatud garantii 3 aastaks
Tagastamine kuni 30 päeva
Tasuta tarne alates 169 €
Üle kolme miljoni kliendi
Professionaalne tugi
