The Wireless GO Gen 3 is a new generation containing a pair of transmitters and a dual receiver. It is ideal for recording spoken word, reporting, video recordings, vlogs, YouTube content, or any audio production in broadcast quality. It offers a range of features to capture clean audio in any situation, including intelligent GainAssist technology and 32-bit recording with 32 GB of internal memory in each transmitter. The modern RØDE Series IV 2.4 GHz digital transmission delivers the best range in its class – up to 260 m line-of-sight. Built-in broadcast-quality condenser microphones ensure crystal-clear sound recording. For even better audio capture, Lavalier II microphones (not included) can be connected to the transmitters. The 3.5 mm TRS microphone input is threaded to prevent accidental disconnection.

The Wireless GO Gen 3 is universal, compatible with cameras, phones, and computers. A dedicated button for recording, automatic on/off function, and a TRRS output connector on the receiver add to its comfort and versatility, enabling audio output or monitoring via headphones (a headphone preamp is required).

TX Transmitters

Each transmitter includes a built-in omnidirectional microphone. Thanks to the threaded 3.5 mm TRS input, you can also connect external lavalier or video microphones. GainAssist is an intelligent function that automatically detects the input signal's volume and adjusts sensitivity to optimally capture any sound or voice. Each transmitter features internal memory for standard recording or the Safety Channel – a dual-channel recording at two volume levels. 32-bit quality recording can be started manually or automatically when the transmitter powers on. Each recording includes a Time Stamp for quick video synchronization in post-production.

With Wireless GO Gen 3, you will never lose audio content – even if the connection to the receiver is interrupted or the recording is distorted due to loud sound. The transmitter can also serve as a standalone recording device or an intelligent voice recorder. The USB-C connector is used for charging or connecting to the RØDE Central app, where you can configure the transmitter settings, download recordings, and archive your files. A fully charged internal battery lasts 7 hours. In case of depletion, you can use the Charge Case Plus to recharge and continue for another 7 hours.

RX Dual Receiver

The dual receiver wirelessly receives the encrypted digital signal from both transmitters, monitors their status, and distributes the signal further. The audio output is available through a 3.5 mm TRRS connector (small jack). You can also connect headphones to this output for direct monitoring of the received sound. The output level can be adjusted using two buttons at the bottom of the receiver. You can select between two output modes:

• Stereo – sound from each transmitter is sent as two independent channels (stereo).
• Mono – sound from both transmitters is mixed and sent as a monophonic signal. 

The USB-C connector allows charging and configuration through the RØDE Central app. Additionally, you can use the receiver as an audio interface for smartphones or computers via USB-C. This enables you to record audio in any audio app or directly sream audio through any streaming app.

The clear display shows:

• Receiver battery status
• Selected Stereo/Mono mode
• Output levels for individual channels
• Battery status of both transmitters
• Wireless signal quality
• Input volume of both transmitters
• Recording status in transmitter memory