Vali riik saadetise kohaletoimetamiseks

RockBoard RBO B LED STRIP 50RC Lamp

Tootekood: 1338180

RockBoard RBO B LED STRIP 50RC Lamp

Tootekood: 1338180

The RockBoard LED Strip 50 cm with Remote Control adds RGB accent lighting to any effects pedalboard, giving players a personalised look on dark stages and clearer footswitch visibility mid-performance. The self-adhesive 3M-backed strip mounts under or along the edges of the board and draws power from any standard pedalboard PSU via a 2.1 x 5.5 mm…

RockBoard RBO B LED STRIP 50RC Lamp

The RockBoard LED Strip 50 cm with Remote Control adds RGB accent lighting to any effects pedalboard, giving players a personalised look on dark stages and clearer footswitch visibility mid-performance. The self-adhesive 3M-backed strip mounts under or along the edges of the board and draws power from any standard pedalboard PSU via a 2.1 x 5.5 mm barrel socket.

  • 50 cm RGB SMD LED strip with 30 colour-changing LEDs for pedalboard illumination
  • Wireless remote control for switching mode, speed and colour without reaching under the board
  • Powered by 5–12 VDC pedalboard PSU at approx. 130 mA (9 V) — no separate mains adapter needed
  • Cut-to-fit every 5 cm (3 LEDs) and includes alcohol pad, cable-tie holders and ties for tidy installation
Täpsem kirjeldus sinu emakeeles ei ole veel saadaval. Abiks võib olla ingliskeelne kirjeldus.

Pedalboard LED Strip with Remote Control — Ambient Stage Lighting

The RockBoard LED Strip 50 cm / 19,69" - Pedalboard Illumination with Remote Control adds RGB accent lighting to any effects pedalboard, giving players a personalised look on dark stages and clearer footswitch visibility. The 50 cm strip mounts under or along the board edges and connects to a 2.1 x 5.5 mm barrel socket on any 5–12 VDC pedalboard PSU.

What Sets This LED Strip Apart

Unlike generic USB-powered LED strips, this RockBoard design runs directly from the pedalboard's own DC power supply — no extra wall adapter needed on stage. The included wireless remote changes settings and colours remotely, and the strip trims every 5 cm to fit boards from compact to mid-size.

LED Configuration and Light Output

RGB SMD LEDs along a flexible PCB produce colour-changing output in static hues or animated modes. With 30 LEDs across 50 cm, illumination stays even along the board's underside or edge.

  • LED Type: RGB SMD — full-colour mixing for static and animated modes
  • Number of LEDs: 30
  • Light Colour: colour changing
  • Control: Mode / Speed / Colour via wireless remote

Dimensions and Mounting

Once installed, the slim profile stays out of the way, and the 3M self-adhesive backing bonds to most pedalboards after a clean with the included alcohol pad.

  • Length: 50 cm — fits compact and mid-size pedalboards
  • Width: 10 mm
  • Height: 3 mm — low profile, won't interfere with pedals above
  • Cuttable: approx. every 5 cm (3 LEDs)
  • Mounting: self-adhesive 3M backing tape

Power Supply and Package Contents

Power comes directly from the pedalboard's existing PSU through a standard barrel socket — no extra mains adapter required.

  • Power Supply: 5–12 VDC, centre negative — runs from any standard pedalboard PSU
  • Connection: 2.1 x 5.5 mm barrel socket
  • Current Draw: approx. 130 mA at 9V
  • Connection Cable: approx. 25 cm incl. socket
  • Package: LED strip, remote controller, alcohol pad, 2 cable-tie holders, 3 cable ties

Sobivus

Tüüp

Lamp

Pakend

Pakend sisaldab

Kaablisidemed, Kaugjuhtimispult

Power supply

Toide

Adapter (not included)

Accessory

Toiteadapter kaasas

Ei

Dimensions and Weight

Pikkus (cm)

50

Laius (mm)

10

Kõrgus (mm)

3

Country

Päritoluriik

Hiina

Dokumendid

Kasutusjuhendid
Teave tootja kohta
Tootja:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Saksamaa
Vastutav isik:
Warwick GmbH & Co Music Equipment KG
Ohutusjuhised

Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.