RockBoard RBO CAB F TMXA 30 BK 30 cm MIDI kaabel
The RockBoard Flat Mini-TRS to FlaX Midi Type A is a 30 cm MIDI cable designed to keep compact pedalboards tidy and signal paths clean. It converts a 3.5 mm TRS stereo mini-jack output into a standard 5-pin DIN MIDI input using the Type A wiring convention, so it works with gear from Boss, Empress, Korg, Akai, MOD and Make Noise without adapters. The flat rectangular cable profile hugs the board surface, and the omni-directional FlaX MIDI plug can be rotated to almost any angle and locked in place with a 1.5 mm hex key.
- Length: 30 cm — short reach for tightly packed pedalboards
- Connector A: 5-pin DIN MIDI Male — standard MIDI input on effects and controllers
- Connector B: 3.5 mm TRS stereo mini-jack Male — matches TRS MIDI outputs on modern pedals
- Wiring: TRS-MIDI Type A (MIDI standard) — Sink on tip, Source on ring, Shield on sleeve
- Flat rectangular cable profile hugs the pedalboard surface and prevents cable jams under the board
MIDI Cable for Compact Pedalboards with TRS Outputs
The RockBoard Flat Mini-TRS to FlaX Midi Type A solves a common pedalboard wiring problem: connecting a pedal with a 3.5 mm TRS MIDI output to a device with a standard 5-pin DIN MIDI input. At 30 cm, it is the shortest option in the Flat TRS to FlaX-MIDI Cable series, sized for boards where the two devices sit side by side.
What Sets This MIDI Cable Apart
On the MIDI end, the FlaX Plug is omni-directional, so the 5-pin DIN connector can be rotated to almost any angle and locked in place using a 1.5 mm hex key (not included). The flat rectangular cable profile hugs the board, preventing cable jams and reducing mechanical stress on the internal conductors.
Connector Configuration and Compatibility
Two connector ends bridge the gap between a 3.5 mm TRS stereo mini-jack output and a 5-pin DIN MIDI input.
- Connector A: 5-pin DIN MIDI Male — standard MIDI input
- Connector B: 3.5 mm TRS stereo mini-jack Male — matches TRS MIDI outputs
- Connector Angle: Straight-Angled — MIDI plug adjustable, TRS plug flat angled
- Compatible With: Boss, Empress, Korg, Akai, MOD, Make Noise and similar TRS-MIDI devices
Cable Construction and Signal Integrity
Flat rectangular conductor geometry is the key to long-term reliability on a pedalboard that gets packed in and out of a case every gig, reducing the twisting that fatigues internal conductors in round MIDI cables.
- Cable Profile: Flat rectangular — hugs the board surface
- Length: 30 cm — short reach for tightly packed boards
- Wiring Standard: TRS-MIDI Type A — Sink on tip, Source on ring, Shield on sleeve
Where This Cable Fits on Your Board
Use this lead whenever a pedal with a 3.5 mm TRS MIDI output needs to reach a device with a traditional 5-pin DIN MIDI input — for example, sending clock or program changes between a multi-effects unit and an older MIDI pedal.
- Type: MIDI Cable — adapter lead between TRS and DIN MIDI
- Package Content: MIDI Cable — single cable, no adapters required
Värv
Mikrofonisisend
Ei
A-tüüpi pistik
B-tüüpi pistik
Pistiku nurk
Pakend sisaldab
MIDI Cable
Pikkus
30 cm
Päritoluriik
Hiina
Dokumendid
Teave tootja kohta
Ohutusjuhised
Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.
Pikendatud garantii 3 aastaks
Tagastamine kuni 30 päeva
Tasuta tarne alates 169 €
Üle kolme miljoni kliendi
Professionaalne tugi
