Albaania
Ameerika Ühendriigid
Argentina
Austraalia
Austria
Belgia
Bosnia ja Hertsegoviina
Brasiilia
Bulgaaria
Eesti
Filipiinid
Hispaania
Holland
Horvaatia
Iirimaa
Itaalia
Kanada
Kolumbia
Kreeka
Leedu
Luksemburg
Läti
Lõuna-Aafrika
Mehhiko
Moldova
Montenegro
Norra
Poola
Portugal
Prantsusmaa
Põhja-Makedoonia
Rootsi
Rumeenia
Saksamaa
Serbia
Slovakkia
Sloveenia
Soome
Suurbritannia
Taani
Türgi
Tšiili
Ukraina
Ungari
Uus-Meremaa
Šveits
Audio-Technica AT-XP3
Dual moving magnet stereo cartridge. The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.
- Audiophile DJ cartridge equipped with a conical stylus
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Signal output level and output impedance characteristics suited for professional DJ applications
- Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade
- Configuration as single cartridge (AT-XP3), Replacement Stylus (ATN-XP3) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP3/H)
- Accessories Included: Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver
- Mounting: Half-inch
- Frequency Response: 20 to 18,000 Hz
- Channel Separation: 20 dB (1 kHz)
- Output Channel Balance: 2.0 dB (1 kHz)
- Output Voltage: 5.5 mV (at 1 kHz, 5 cm/sec)
- Vertical Tracking Angle: 20 degrees
- Vertical Tracking Force Range: 2.0 to 4.0g (standard 3.0 g)
- Stylus Shape: Conical
- Stylus Size: 0.6 mil
- Stylus Construction: Bonded Round Shank
- Cantilever: Carbon reinforced ABS
- Coil Impedance: 6,700 Ohm (1 kHz)
- Coil Inductance: 550 mH (1 kHz)
- Static Compliance: 20 x 10 – 6 cm / dyne
- Dynamic Compliance: 6.0 x 10 – 6 cm / dyne (100 Hz)
- Recommended Load Impedance: 47,000 Ohm
- Recommended Load Capacitance: 100-200 pF
- Cartridge Weight: 6.2 g
- Dimensions: 17.2 x 17.8 x 28.3 mm
- Replacement Stylus: ATN-XP3
Shape
Tracking Force
Tracking force recommended
3g
Tracking angle
20°
Frequency Range
Impedance (Ohm)
6700
Recommended load resistance
47 kOhm
Recommended load capacitance
100-200 pF
Channel separation at 1 kHz
20
Voltage
Mounting
1/2"
Weight (g)
6,2
Made in
Japan
Kõik arvustused pärinevad kinnitatud klientidelt, kes on meilt varem toote ostnud.
Dokumendid
Instructions for use
Teave tootja kohta
Ohutusjuhised
Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.
Pikendatud garantii 3 aastaks
Tagastamine kuni 30 päeva
Tasuta tarne alates 299 €
Üle kolme miljoni kliendi
Professionaalne tugi