Yamaha DBR12 Aktiivkõlar

Yamaha DBR12 — 1000 W Bi-Amped 12" Active PA Speaker

The Yamaha DBR12 is a 12-inch two-way bi-amped powered loudspeaker built for portable live-sound work, where a single cabinet has to handle front-of-house, side-fill, or floor-monitor duty without compromise. Drawing on the same DSP and amplifier platform that powers Yamaha's professional DSR and DXR lines, this model delivers 1000 W of dynamic output and reaches a maximum SPL of 131 dB. The DBR12 is the right choice for bands, mobile DJs, houses of worship, and rental users who need a reliable, easy-to-carry speaker that stays clean at both low and high volumes.

What Sets the DBR12 Apart

Inside the cabinet, Yamaha applies its proprietary FIR-X tuning — a linear-phase FIR filter that aligns the 2.1 kHz crossover between the 12" ferrite-magnet woofer and the 1.4" ferrite-magnet compression driver for smooth phase response across the listening area. The D-CONTOUR processor adds dynamic EQ curves that shift as the speaker gets louder, so the top end stays musical instead of harsh when the rig is pushed. A switchable high-pass filter (off / 100 Hz / 120 Hz) makes it straightforward to pair the cabinet with a subwoofer for full-range systems.

Power & Amplification — Headroom for Real Gigs

Bi-amped amplification matters because the low-frequency and high-frequency drivers each get their own amplifier channel optimized for their band of work, rather than sharing a single amp with a passive crossover. That architecture is what lets this cabinet hit concert-level SPL while keeping vocals intelligible.

• Dynamic Output Power: 1000 W (LF 800 W + HF 200 W) — peak headroom for live performance peaks
• Continuous Output Power: 465 W (LF 400 W + HF 65 W) — sustained rating for thermal planning
• Maximum SPL: 131 dB at 1 m on axis — enough output for small-to-medium venues
• Frequency Range: 52 Hz – 20 kHz (-10 dB) — full-range response from kick drum to cymbals

Drivers & Coverage — Controlled, Even Throw

The 12" low-frequency cone with a 2" voice coil moves serious air for kick, bass, and lower vocals, while the 1.4" diaphragm compression driver on a 1" throat handles the vocal range and high-frequency detail. The 90° horizontal × 60° vertical coverage pattern is wide enough to cover a small audience from a single cabinet yet tight enough to keep feedback under control on stage.

• LF Driver: 12" cone, 2" voice coil, ferrite magnet
• HF Driver: 1.4" diaphragm, 1" throat compression driver, ferrite magnet
• Crossover: 2.1 kHz FIR-X tuning (linear phase FIR filter)
• Nominal Coverage: 90° H × 60° V

Inputs, DSP & Physical Build — Ready for the Road

On the rear panel, INPUT 1 accepts a single XLR/TRS combo jack for microphone or line-level sources, while INPUT 2 adds a second combo plus unbalanced RCA pins for DJ controllers, laptops, or media players. An XLR output can be set to parallel-through or to a summed mix of both inputs, so a pair of cabinets can be linked from a single source. The plastic enclosure keeps weight down for one-person load-in and load-out.

• Inputs: Combo (XLR/TRS) + Combo + RCA (unbalanced) — covers mic, instrument, and playback sources
• Output: XLR3-32 (CH1 Parallel Through or CH1+CH2 Mix)
• Onboard DSP: D-CONTOUR (FOH/MAIN, MONITOR, OFF) + switchable high-pass filter
• Dimensions (W × H × D): 376 × 601 × 348 mm
• Net Weight: 15.8 kg
• Pole Socket: 35 mm with bottom and rear M8 rigging points for flown installations

Who the Yamaha DBR12 Is For

The Yamaha DBR12 is the right choice for working musicians, mobile DJs, and small-venue operators who need a single powered cabinet that can move between main, monitor, and side-fill roles without re-patching. Solo performers and acoustic duos get a clean vocal reproduction with enough low end to skip a sub for coffee-house and small-club gigs; full bands and DJs can pair two cabinets with a sub for club and small-festival coverage. Houses of worship and conference presenters benefit from the speech-friendly voicing and the straightforward two-input mixer layout that lets a volunteer operator run the system without a separate desk.

Yamaha DBR Series — Pro Audio DNA at an Accessible Tier

The DBR Series sits at the entry point of Yamaha's powered loudspeaker lineup, sharing the DSP philosophy and amplifier technology developed for the professional DSR and DXR series above it. Yamaha's seven-year warranty on powered speakers backs every DBR12 cabinet, a level of manufacturer confidence rarely seen at this price tier. For users stepping up from a portable all-in-one PA or adding a second system for a growing gig calendar, the DBR12 brings proven Yamaha engineering into a lighter, more affordable package.