Samson SRK12

The Samson SRK12 is a 12-space 19" universal equipment rack built from heavy-duty steel with a black brushed anodized finish. It comes pre-assembled on four 3" (75 mm) locking casters, supports up to 136 kg of gear with the casters fitted, and ships with both U.S. and European rack screws so it accepts any standard 19" component.

• Rack Spaces: 12 U (standard 1.75" / 44 mm each) — room for a typical studio's worth of outboard gear, interface, and power amp in one frame.
• Load Capacity: 136 kg with casters, 204 kg without — handles full 1U-3U rack units without flex.
• Mobility: Four 75 mm locking casters — roll the rig between rooms, then lock the front pair for fixed installation.
• Ventilation & Build: Perforated steel side panels — passive airflow keeps Class-D amps and processors cool during long sessions.

12-Space 19" Universal Rack for Studio and Live Gear

The Samson SRK12 is a 19" universal equipment rack designed to give home studios, project rooms, and small live rigs a clean, organized home for 1U and 2U processors, interfaces, and power amplifiers. Twelve rack spaces add up to roughly 21" of vertical mounting height, enough to hold a typical channel strip, audio interface, monitor controller, headphone amp, and power conditioner in a single frame. Heavy-duty steel panels and fully enclosed sides keep the assembly rigid, while a black brushed anodized finish gives it a professional look that fits any studio or stage setup.

Built for Setup, Transport, and Easy Cable Access

What makes this rack stand out in the entry-level furniture category is its ready-to-roll design and dual thread standard support. The SRK12 ships with four 75 mm casters pre-attached to the bottom plate, with the front pair lockable, so the rack can be wheeled out of a closet, into a vehicle, or across a stage and locked in place when ready. Both U.S. and European rack screws are included in the box, meaning the rails accept gear from virtually any manufacturer without hunting for the right thread size. Perforated side panels provide passive ventilation, helping Class-D amplifiers and hot-running processors stay cool during extended sessions.

Dimensions and Capacity — Right-Sized for a Compact Studio

Choosing the right rack size matters when floor space and gear depth are limited. The SRK12 is sized to fit through standard doorways while still leaving room to grow a setup.

• Rack Spaces: 12 U (each 44 mm / 1.75" high) — 533 mm of total vertical mounting area.
• Outside Dimensions: 700 mm H (with casters), 600 mm H (without) × 507 mm W × 460 mm D — fits a corner or against a wall without dominating the room.
• Load Capacity: 136 kg with casters, 204 kg without — supports a full rack of 1U-3U units with headroom to spare.

Mobility and Installation — Roll It In, Lock It Down

For setups that move between rooms or venues, the SRK12 is built to be transported without disassembly. Front and rear rack rails accept both shallow and deep units, and the locking casters keep the rig planted once positioned.

• Casters: Four 75 mm casters, front pair lockable — reposition the rack without lifting.
• Rack Rails: Front and rear mounting rails — supports deep units and rear-panel connection access.
• Included Hardware: U.S. and European rack screws, blank single-space panel, screwdriver, installation guide — everything needed to mount gear straight out of the box.

Construction and Finish — Steel Built to Last

The SRK12 prioritizes structural rigidity over flashy aesthetics, which is exactly what working studios and AV installs need.

• Material: Heavy-duty steel with fully enclosed side panels — protects gear from accidental knocks.
• Finish: Black brushed anodized — resists fingerprints and matches most studio furniture.
• Ventilation: Perforated side panels for passive airflow — no fans required, no extra noise in the room.

Who Is It For

The Samson SRK12 is the right choice for home studio owners, content creators, and small venue operators who need a sturdy, mobile 12-space rack without paying for premium furniture-grade builds. It suits anyone consolidating audio interfaces, outboard compressors, monitor controllers, and power conditioning into one organized, easy-to-move frame. If a setup needs to travel between a home studio and a rehearsal space, or between rooms in a school or house of worship, the locking casters and included hardware make this rack a practical, no-fuss solution at this tier.