FiiO Q5s Titanium Hi-Fi kõrvaklappide eelvõimendi Black
Kaubamärk: FiiO
Tootekood: 323704 (Q5S-TITANIUM)
FiiO Q5s Titanium Hi-Fi kõrvaklappide eelvõimendi Black
Kaubamärk: FiiO
Tootekood: 323704 (Q5S-TITANIUM)
FiiO Q5s Titanium Hi-Fi kõrvaklappide eelvõimendi Black
FiiO Q5s Titanium Hi-Fi kõrvaklappide eelvõimendi Black
Even in the new generation, it is possible to use FiiO amplifier modules, while the package includes a new AM3E amplifier with a classic headphone output and two balanced outputs. The power was also significantly increased, which now reaches 210 mW (32 Ω), resp. 560 mW (32 Ω) for balanced outputs.
MFi, HiRes, aptx HD and LDAC certification:
The Q5s fully supports Apple devices, meets all HiRes quality playback requirements and can wirelessly send music in very high quality. All lossless codecs aptX (HD, LL) and HiRes LDAC up to 96 kHz resolution are now supported.
Interchangeable amplifier modules:
You don't have to limit yourself to the basic amplifier in the package, but you can always buy an amplifier with extra power for large home headphones or, on the contrary, a delicate variant for sensitive in-ear monitors. In addition, the basic AM3E also works with balanced outputs and enhanced performance, so you will definitely not suffer.
ADC volume control:
A clever solution ensuring perfect channel balance in the entire range while maintaining a large fineness of stepping.
Specifications:
- Dimensions: 124 x 64 x 16 mm
- Inputs: USB, optical, line, coaxial (3.5 mm shared Jack connector)
- Outputs: Symmetrical headphone jack 2.5 mm, Classic headphone output Jack
- 3.5 mm, Symmetrical headphone 4.4 mm
- Recommended headphone impedance: 16 - 150 ohms (up to 300 ohms for symmetry)
- Channel balance: 0.1 dB
- Gain: High / Low
- Bass Boost: Yes
- Charging: 3.5 h (5 V, 2 A), battery 3800 mAh
- Endurance: 25 h (Aux in), 10 h (USB in, Opt in, coax in, BT)
- Sampling: 384/32 (USB), 192/24 (coax), 96/24 (optics)
- DAC: 2x AK4493EQ
- USB: XMOS XU208
- Bluetooth : CSR8675
- Amplifiers: OPA1642 × 2 , OP + AMP: AD8620 + OPA926
- THD + N: < 0.001% (1 kHz / 10kΩ)
- Range: 5 - 90,000 Hz (-3 dB)
- Line level: 1.8 Vrms
- Signal-to-noise ratio: ≥115 dB (A-weighted)
- Channel separation: > 97 dB (1 kHz)
- Output Jack 3.5 mm, ≥280 mW (16Ω / THD + N < 1%), ≥210 mW (32Ω / THD + N < 1%), ≥30 mW (300Ω / THD + N < 1%), THD + N : < 0.002% (1 kHz, Output: > 6 Vp-p, 150mA
- Output Jack 2.5 mm / 4.4 mm, ≥535 mW (16Ω / THD + N < 1%), ≥560 mW (32Ω / THD + N < 1%), ≥112 mW (300Ω / THD + N < 1%), THD + N: < 0.002% (1 kHz) Output: > 10.5 Vp-p, 150mA
- Power supply: USB-C
Colour
Power Supply
USB-C
UK/EU Power supply included
No
Weight (g)
195
Made in
China
Põhineb arvustuste arvul: 1
Kõik arvustused pärinevad kinnitatud klientidelt, kes on meilt varem toote ostnud.
Dokumendid
Instructions for use
Ohutusjuhised
Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.
Pikendatud garantii 3 aastaks
Tagastamine kuni 30 päeva
Tasuta tarne alates 299 €
Üle kolme miljoni kliendi
Professionaalne tugi
