Bugera AC60 Elektroakustilise kitarri kombo

Bugera AC60 Acoustic Combo Amplifier — Clean 60 W Tone for Singer-Songwriters

The Bugera AC60 is a 60-watt, 2-channel acoustic guitar combo amplifier built to project an acoustic guitar and a vocal mic with equal clarity in small venues. A custom Turbosound 8-inch dual-cone speaker pairs with two input channels for a self-contained rig that fits a tabletop or speaker stand.

What Sets the AC60 Apart in the Acoustic Amp Category

Channel 2 supplies switchable +48 V phantom power, so a singer-songwriter can run a condenser microphone alongside their pickup-equipped guitar without an external preamp. The on-board Klark Teknik 24-bit multi-effects engine ships with 16 presets — including 7 dedicated reverb programs from tight room to cathedral wash — assignable to either channel.

Power and Speaker — Headroom for Solo Gigs

The 60-watt solid-state power stage drives a single 8-inch Turbosound dual-cone driver, a British-engineered loudspeaker custom-tuned for acoustic reproduction. The cabinet produces enough volume for an unmic'd coffee-house set or a small worship hall.

• Output Power: 60 W — solid-state headroom for instrument and vocal channels
• Speaker: 1 × 8 in Turbosound dual-cone — full-range response tuned for acoustic guitar
• Cabinet Dimensions: 32.7 cm W × 27.5 cm H × 23.7 cm D — compact footprint

Channels and EQ — Two Inputs, Two Personalities

Channel 1 carries a 1/4-inch instrument jack with a High/Low pickup switch and a 3-band EQ shaped for acoustic guitar. Channel 2 adds a combination 1/4-inch/XLR input with a Line/Mic switch, a 2-band EQ, and per-channel clip indicators.

• Channel 1: 1/4 in instrument input with High/Low pickup switch — matches active preamps and passive undersaddle pickups
• Channel 2: Combo 1/4 in / XLR with Line/Mic switch and +48 V phantom power — runs dynamic vocal mics or condensers
• EQ: 3-band on channel 1, 2-band on channel 2 — acoustic-voiced tone shaping with clip indicators

Effects and Connectivity — Studio Tools Onstage

The Klark Teknik 24-bit multi-FX processor delivers 16 presets — 7 reverbs, 3 choruses, 3 delay-plus-chorus combinations, and 3 straight delays — with a pan knob that routes the effect to channel 1, channel 2, or both. A balanced XLR DI output feeds the house mixer.

• Built-in Effects: Klark Teknik 24-bit Multi-FX, 16 presets including 7 reverbs — adds room, hall, and cathedral ambience
• DI Output: Balanced XLR Direct Output — sends a clean mic-level signal to the front-of-house console
• Aux and Headphone: 3.5 mm Aux input and 1/4 in Phones output — play along with backing tracks or practise silently

Who Should Choose the Bugera AC60

The AC60 is the right choice for solo acoustic performers, singer-songwriters, and small worship teams who need a single amp for both an acoustic guitar and a vocal microphone. The phantom-powered channel 2 also suits hybrid pickup-plus-microphone players.

Bugera, Turbosound, and Klark Teknik — A Heritage of Pro Audio

Bugera sits inside the Music Tribe family alongside Behringer. Turbosound, a British loudspeaker maker with 30+ years of touring-PA heritage and multiple Queen's Awards, supplies the custom 8-inch dual-cone driver. Klark Teknik, a 40-year-old British effects house, supplies the on-board 24-bit multi-effects engine. Designed and engineered in Germany, the AC60 carries a 3-year warranty.