Vali riik saadetise kohaletoimetamiseks

Soodusmüük on lõppenud

Audio-Technica AT-VM95SP Hi-Fi kassett

5/5

Tootekood: 308732 (AT-VM95SP)

Soodusmüük on lõppenud

Audio-Technica AT-VM95SP Hi-Fi kassett

5/5

Tootekood: 308732 (AT-VM95SP)

Soodusmüük on lõppenud
Seda toodet ei toodeta enam või ei kuulu see enam meie tootevalikusse. Soovitame valida alternatiivse toote.
Hi-Fi kassett Audio-Technica AT-VM95SP Hi-Fi kassett

Audio-Technica AT-VM95SP Hi-Fi kassett

Vali alternatiiv (4)
Dual moving magnet cartridge. This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to...

Audio-Technica AT-VM95SP Hi-Fi kassett

Dual moving magnet cartridge. This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Täpsem kirjeldus sinu emakeeles ei ole veel saadaval. Abiks võib olla ingliskeelne kirjeldus.

Specifications:

 

  • Frequency Response: 20-20,000 Hz
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force: 4,5-5,5 g (5 g standard)
  • Stylus Construction: Bonded round shank
  • Recommended Load Impedance: 47000 Ohm
  • Coil Impedance: 3,3 KOhm (1 kHz)
  • DC Resistance: 485 Ohm
  • Coil Inductance: 550 mH (1 kHz)
  • Recommended load capacitance: 100 to 200 pF
  • Output: 2,7 mV (1 kHz, 5 cm/sec.)
  • Channel Balance: 1,5 dB (1 kHz)
  • Stylus Shape: 3,0 mil conical
  • Cantilever: Aluminum pipe
  • Static Compliance: 12 x 10-6 cm/dyne
  • Dynamic Compliance: 2 x 10-6 cm/dyne (100 Hz)
  • Mount: Half-inch
  • Weight: 6,1 g (0,22 oz)
  • Dimensions: 17,2 mm (0,68") H × 18,9 mm (0,74") W × 28,3 mm (1,20") D

Sobivus
Omadused

Shape

Conical

Tracking Force

4,5 - 5,5 g

Tracking force recommended

5 g

Tracking angle

23°

Stylus tip radius

3 mil

Frequency Range

20 Hz - 20 kHz

Compliance

2 x 10-6 cm (100Hz)

Recommended load resistance

47 kOhm

Recommended load capacitance

100 - 200 pF

Acoustics

Channel balance at 1 kHz

1,5 dB

Pakend

Pakend sisaldab

Kruvid, Washer (2 x)

Power supply

Voltage

2,7 mV

Dimensions and Weight

Weight

6,1

Country

Made in

Japan

Põhineb arvustuste arvul: 3

Klientide arvustused toote kohta

Kõik arvustused pärinevad kinnitatud klientidelt, kes on meilt varem toote ostnud.

K

Klient

sk Lipp
Slovakkia 28.01.2025

Vyborny cisty zvuk na starych selakoch. Neporovnatelne zlepsenie oproti beznemu konickemu hrotu.

Automaattõlge

Seda arvustust ei saa tõlkida.
S

Stanislav Š.

cz Lipp
Tšehhi Vabariik 08.10.2023

Na staré desky jako dělané:-);-)

Automaattõlge

Seda arvustust ei saa tõlkida.
J

Jaňák P.

sk Lipp
Slovakkia 28.07.2022

Dokumendid

Teave tootja kohta
Tootja:
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, 194-8666, Tokyo, Jaapan
Vastutav isik:
Audio-Technica Dutch Branch
Waardsedijk Oost 7, 3417 XJ, Montfoort, Holland
Ohutusjuhised

Selle toote spetsiifilised ohutusjuhised leiad kasutusjuhendist.