Rev'it! Jacket Argon 2 Black/Anthracite 52 Leather Jacket

Expanding upon the Argon 2 family (including the one-piece and combi suits) we bring you the Argon 2. An entry-level, race-derived, full-leather jacket for street riders with speed in their DNA.

Good genes

• The Argon 2 jacket carries the same race aesthetic as part of the Argon 2 product family. We made a couple of changes to diversify it though. The prints are similar to the one-piece but reversed, additionally the jacket has the same prints as the combi suit. More ergonomic perforation has been added to keep you cool plus the suit is build for high-speed riding, enabling the wearer to take corners at high speeds. How is that achieved? Well, the suit is aggressively pre-shaped and uses the same materials as the Argon 2 racing suit.

Built-in safety

• With a AAA CE classification, you know you’re in good hands with the Argon 2 jacket. Furthermore, TPU hard protectors at the shoulders, along with interior armor at the elbows and shoulders come standard - the divided chest protectors and the back protector can also be added at your request.

SEEFLEX CE-level 2 protection

• Certified CE-level 2 according to the norm EN1621-1:2012, the SEEFLEX protector is an innovative creation from the in-house R&D department. The norm also tests the impact levels in various +/- temperature ranges. The SEEFLEX protectors easily surpass the norm without sacrificing wearer comfort. Because of its open-structure composition, they’re breathable and allow air to easily pass through; helping to prevent the rider from building up an unnecessary heat.

Prepared for SEESOFT CE-level 2 back protector insert

• An easy upgrade for additional protection. The prepared pockets are tailor-made to house the SEESOFT armor, giving riders that extra peace of mind when on the road. They can be put in or taken out easily and quickly and don’t interfere with daily riding activities.

Prepared for divided SEESOFT CE-level 1 chest protector

• An easy upgrade for additional protection. The prepared pockets are tailor-made to house the SEESOFT armor, giving riders that extra peace of mind when on the road. They can be put in or taken out easily and quickly and don’t interfere with daily riding activities.

Short and long connection zipper

• The long connection zipper is designed to create a 360-degree connection between jackets and trouser, while the short connection zipper on the membrane ensures that the membrane stays in place. The inclusion of these zippers are designed to stop the jacket from riding up the rider’s back, and/or to prevent the exposure of unnecessary skin; helping to keep you safe on the road in the event of an unfortunate mishap.

Jeans loop

• Not only does it help prevent the jacket from riding up when on a motorcycle, but it also helps prevent unnecessary exposure of skin while on the open road.

FIT

Tight fit

• The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.

COMFORT FEATURES

Adjustability

• Adjustment strap at waist

Pockets

• Inner napoleon pocket
• Slit pocket at waist
• Three inner pockets

Lining

• Mesh

Features

• Comfort cuffs
• Cuff zipper: The zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.
• Long connection zipper
• Short connection zipper
• Soft edge at collar
  For extra comfort, the inside of the collar is covered with a soft fabric.
• Stretchable cuff
• Stretch at armholes
• Stretch at inside arms
• Stretch at shoulders
• Stretch at waist

CLIMATE REGULATION

Insulation

• Detachable thermal body warmer
• Wind catcher behind cuff zipper
• Wind catcher behind front zipper: Behind the front a panel has been installed to block the wind.

Ventilation

• Perforation on upper back
• Perforation on upper front

PROTECTION

Protection

• Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector: The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
• Prepared for SEESOFT CE-level 2 Insert Back Protector: The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
• Safety seams: The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
• SEEFLEX CE-level 2 Elbow Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
• SEEFLEX CE-level 2 Shoulder Protectors: Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
• TPU protection at shoulder

Outer shell material

• Artificial Leather: A sythetic version of leather with a similar look.
• Buffalo leather: Buffalo is a type of leather that distinguishes itself from cowhide with a more rugged appearance. The finish provides a classical look, allowing it to age beautifully.
• Polyester stretch

Visibility

• Laminated reflection on back: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

CARE

Outershell

• Do not wash.
• Do not bleach.
• Do not tumble dry.
• Do not iron.
• Do not dry clean.

Warnings

• Dry naturally / completely before storing.
• Refer to the user manual.
• Spot clean with damp cloth.
• Use REV'IT! designated (leather) cleaning agents only.

Removable thermal liner

• Machine wash 30°C, mild cycle.
• Do not bleach.
• Do not tumble dry.
• Do not iron.
• Do not dry clean.

Warnings

• Use mild detergent.